RX400h · Service Manual BRAKE

REASSEMBLY

Removal / installation


1. INSTALL PARKING BRAKE CABLE ASSY NO.1

  1. C108693E02
    Pass the parking brake No.1 cable assembly through the parking brake pedal and hold the cable with the clip.

  1. Pass the parking brake cable through the pedal guide. Temporarily tighten the wire adjusting No.1 nut and lock nut.

    HINT:
    Fully tighten the wire adjusting No.1 nut and lock nut when adjusting the parking brake pedal free play.

  1. Fully bend the parking brake pedal claw.


2. INSTALL PARKING BRAKE SWITCH ASSEMBLY

  1. C108691
    Install the parking brake switch assembly with the screw.


3. INSTALL PARKING PEDAL PAD

  1. C110881E02
    Engage the claw and install the parking pedal pad on the parking brake pedal.

← DISASSEMBLYINSTALLATION →