P0A1D-390
Diagnostic trouble codes
DESCRIPTION
The HV control ECU monitors internal operations and detects a malfunction.| DTC No. |
INF Code |
DTC Detection Condition |
Trouble Area |
| P0A1D |
390 |
Charge control error |
HV control ECU |
| P3004 |
133 |
A high-voltage wiring system error signal is detected in the HV control ECU |
HV control ECU |
MONITOR DESCRIPTION
When HV control ECU detects that the HV battery has been charged and exceeds the entry limit, the HV control ECU will illuminate the MIL and set a DTC.INSPECTION PROCEDURE
| 1. READ OUTPUT DTC (HV) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Select the following menu items: Powertrain / Hybrid Control / DTC.
Read output DTC. (Click here)
- Result:
- DTCs other than P0A1D-390 and P3004-133 are output.
|
|
||||
| NO | ||
 |
||
| ||