P0A94-585
Diagnostic trouble codes
DESCRIPTION
Refer to the description of the boost converter. (Click here)| DTC No. |
INF Code |
DTC Detection Condition |
Trouble Area |
| P0A94 |
585 |
Boost converter voltage (VL) sensor performance problem |
w/ converter inverter assembly (MG ECU) |
MONITOR DESCRIPTION
The HV control ECU monitors the boost converter voltage sensor signal. If the HV control ECU detects a fault in the sensor signal, HV control ECU illuminates the MIL and sets a DTC.INSPECTION PROCEDURE
| 1. READ OUTPUT DTC (HV) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Select the following menu items: Powertrain / Hybrid Control / DTC.
Read output DTC. (Click here)
- Result:
- The DTCs shown in the table below are output:
DTC No.
Relevant Diagnosis
P0A1A, P0A1B
MG ECU malfunction
P0A1D
HV control ECU malfunction
|
|
||||
| NO | ||
 |
||
| ||