INSTALLATION
Removal / installation
| 1. INSTALL REAR STABILIZER BAR |
Install the rear stabilizer bracket.
Install the rear stabilizer bar with the bolt.
- Torque:
- 54 N*m{ 551 kgf*cm , 40 ft.*lbf }
Install the rear stabilizer bar with the 2 bolts.
- Torque:
- 19 N*m{ 194 kgf*cm , 14 ft.*lbf }
| 2. INSTALL REAR STABILIZER LINK ASSEMBLY LH |
Install the rear stabilizer link assembly LH with the 2 nuts.
- Torque:
- 39 N*m{ 398 kgf*cm , 29 ft.*lbf }
- HINT:
- If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.
| 3. INSTALL REAR STABILIZER LINK ASSEMBLY RH |
Install the rear stabilizer link assembly RH with the 2 nuts.
- Torque:
- 39 N*m{ 398 kgf*cm , 29 ft.*lbf }
- HINT:
- If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.
| 4. INSTALL REAR WHEELS |
- Torque:
- 103 N*m{ 1,050 kgf*cm , 76 ft.*lbf }