RX400h · Service Manual SUSPENSION & AXLE

REMOVAL

Removal / installation


1. REMOVE REAR WHEELS

2. REMOVE REAR STABILIZER LINK ASSEMBLY LH

  1. C107477E01
    Remove the 2 nuts and rear stabilizer link assembly LH.

    HINT:
    If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.


3. REMOVE REAR STABILIZER LINK ASSEMBLY RH

  1. Remove the 2 nuts and rear stabilizer link assembly RH.

    HINT:
    If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.


4. REMOVE REAR STABILIZER BAR

  1. C108218E01
    Left side:
    Remove the bolt.

  1. C108219E01
    Right side:
    Remove the 2 bolts and rear stabilizer bar.

← COMPONENTSINSPECTION →