INSPECTION

Inspection

INSPECT FRONT SEAT CUSHION HEATER LH

1. Measure the resistance according to the value(s) in the table below.
   

   Resistance:

   Tester Connection	Condition	Specified Condition
   A-1 - B-1	Seat heater temp. below 25 to 35°C (77 to 95°F)	8,000 to 8,400 Ω
   A-1 - B-1	Seat heater temp. 46 to 54°C (115 to 129°F)	3,900 to 4,300 Ω
   A-2 - A-3	Seat heater temp. below 25 to 35°C (77 to 95°F)	Below 1 Ω
   A-2 - A-3	Seat heater temp. 46 to 54°C (115 to 129°F)	10 kΩ or higher (thermostat OFF)
   A-4 - B-2	Always	Below 1 Ω

   If the result is not as specified, replace the front seat cushion heater.
   

INSPECT FRONT SEAT CUSHION HEATER RH

1. Measure the resistance according to the value(s) in the table below.
   

   Resistance:

   Tester Connection	Condition	Specified Condition
   A-1 - B-1	Seat heater temp. below 25 to 35°C (77 to 95°F)	8,000 to 8,400 Ω
   A-1 - B-1	Seat heater temp. 46 to 54°C (115 to 129°F)	3,900 to 4,300 Ω
   A-2 - A-3	Seat heater temp. below 25 to 35°C (77 to 95°F)	Below 1 Ω
   A-2 - A-3	Seat heater temp. 46 to 54°C (115 to 129°F)	10 kΩ or higher (thermostat OFF)
   A-4 - B-2	Always	Below 1 Ω

   If the result is not as specified, replace the front seat cushion heater.