INSTALLATION
Removal / installation
| 1. INSTALL REAR FOG LIGHT ASSEMBLY |
Install the rear fog light assembly with the screw and the claw.
| 2. INSTALL REAR BUMPER ASSEMBLY |
Install the rear reflector connectors.
Engage the 10 claws and install the rear bumper assembly
Install the 8 screws and 2 clips.
Install the 4 nuts.
- Torque:
- 8.0 N*m{ 81 kgf*cm , 71 in.*lbf }
| 3. INSTALL REAR BUMPER STOPPER UPPER |
| 4. INSTALL REAR FLOOR FINISH PLATE |
Engage the 2 claws and 6 clips, and install the rear floor finish plate.
Install the 2 clips.
| 5. INSTALL DECK FLOOR BOX REAR |
Install the deck floor box rear with the 2 clips.