RX400h · Service Manual BODY ELECTRICAL

INSPECTION

Inspection


INSPECT PERSONAL LIGHT ASSEMBLY

  1. E068610
    Remove the personal light assembly.

  1. Connect the battery positive (+) lead to terminal 17 and negative (-) lead to terminal 6.

  1. Turn the personal light switch in DOOR position.

  1. Check that the light comes on.

  1. Connect the battery positive (+) lead to terminal 17 and negative (-) lead to terminal 5.

  1. Turn the personal light switch in ON position.

  1. Check that the light comes on.

    OK:
    Comes on

    If the light does not come on, replace the personal light assembly.

← INSTALLATIONINSPECTION →