RX400h · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation


1. INSTALL HEADLIGHT SWIVEL ECU (for RHD)

  1. E068374
    Install the headlight swivel ECU with the bolt and the nut.

    Torque:
    bolt:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

    Torque:
    nut:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

  1. Connect the connector.


2. INSTALL HEADLIGHT SWIVEL ECU (for LHD)

  1. E068367
    Install the headlight swivel ECU with the nut.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

  1. Connect the connector.


3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

  1. B108513E03
    Connect the connectors.

  1. Install the 2 bolts <A>, the 2 screws <C>, and the glove compartment door assembly.


4. INSTALL INSTRUMENT PANEL NO.2 UNDER COVER SUB-ASSEMBLY (for RHD)

  1. B112171
    Connect the connectors.

  1. Engage the 3 claws and install the instrument panel No.2 under cover sub-assembly.


5. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER (for LHD)

  1. B108587E01
    Connect the connectors.

  1. Engage the 5 claws and the 4 clips.

  1. Connect the hood lock control cable assembly.

  1. Install the bolt <A>, the screw <C>, and the instrument panel finish panel sub-assembly lower.


6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

  1. B108509
    Install the 2 clips and the cowl side trim sub-assembly LH.


7. INSTALL FRONT DOOR SCUFF PLATE LH

  1. B111782
    Connect the connector. (w/ illumination scuff plate)

  1. Engage the 6 claws and 4 clips, and install the front door scuff plate.


8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

9. PERFORM INITIALIZATION
(Click here)
← REMOVALCOMPONENTS →