REMOVAL
Removal / installation
| 1. REMOVE REAR WIPER ARM COVER |
Remove rear wiper arm cover.
| 2. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY |
Remove the nut, rear wiper arm and blade assembly.
| 3. REMOVE REAR WIPER SHAFT COVER |
Remove the rear wiper shaft cover.
| 4. REMOVE REAR NO.1 WIPER LINK PIVOT NUT |
Using the socket wrench 27 mm (1.06 in.), remove the rear No.1 wiper link pivot nut.
| 5. REMOVE REAR NO.1 WIPER LINK PIVOT WASHER |
Remove the rear No.1 wiper link pivot washer.
| 6. REMOVE BACK DOOR TRIM PANEL ASSEMBLY UPPER |
Disengage the 10 clips and remove the back door trim panel assembly upper.
| 7. REMOVE REAR WIPER MOTOR |
Disconnect the connector.
Remove the 3 bolts and the rear wiper motor.