INSPECTION
Inspection
| REAR WIPER MOTOR ASSEMBLY |
Connect the positive battery (+) to the terminal 1 (+B) of the connector, the negative battery (-) to the terminal 3 (LS) and rear wiper motor assembly body, and check that the rear wiper motor assembly operates.

Automatic Stop Position Operation Check

Connect the positive battery (+) lead to the terminal 1 (+B) of the connector, the negative battery (-) to the terminal 3 (LS) and rear wiper motor assembly body. With the motor being rotated disconnect the terminal 3 (LS) from the battery (-), then check that the wiper motor stops automatically at the automatic stop position.
