RX400h · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation


1. INSTALL REAR WIPER RUBBER

  1. E059361E02
    Install the rear wiper rubber to the 2 rear wiper rubber backing plates.

    NOTICE:
    Install the rear wiper rubber backing plates in the correct direction.

  1. E061233
    Insert the rear wiper rubber from the claw position of the middle of the rear wiper blade assembly to the end.

  1. E060706
    After passing the rear wiper rubber through the rear end side claw, allow it to stick out from the rear end stopper and slide it through the front tip side claw.


2. INSTALL REAR WIPER BLADE ASSEMBLY
← REMOVALCOMPONENTS →