RX400h · Service Manual BODY

REASSEMBLY

Removal / installation


1. INSTALL CUSHION RUBBER

2. INSTALL HOOD LOCK ASSEMBLY

  1. B069274E01
    Connect the connector and the cable.

  1. Install the hood lock assembly with the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Install a nut cap.


3. INSTALL HOOD LOCK CONTROL CABLE COVER

4. INSTALL COOL AIR INTAKE DUCT SEAL

5. INSTALL HOOD HINGE ASSEMBLY LH

  1. B069272
    Install the hood hinge assembly LH with the 2 bolts.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }


6. INSTALL HOOD HINGE ASSEMBLY RH

  1. Install the hood hinge assembly RH with the 2 bolts.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }


7. INSTALL HOOD SUB-ASSEMBLY

  1. B069273
    Install the hood sub-assembly with the 2 bolts.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }

    HINT:
    Use the same procedure for removal on the RH side.


8. INSTALL HOOD TO FRONT FENDER SEAL RH

9. INSTALL HOOD TO FRONT FENDER SEAL LH

10. INSTALL HOOD TO RADIATOR SUPPORT SEAL

11. INSTALL HOOD SUPPORT ROD

NOTICE:
  1. Do not touch the extendable portion of the rod to prevent foreign objects from attaching to the rod surface.
  2. Do not push sideways on the rod because the rod may bend.

  1. Install the hood support rod to the body with the bolt.

    Torque:
    19.5 N*m{ 199 kgf*cm , 14 ft.*lbf }

  1. Install the hood support rod and clip to the hood sub-assembly.


12. INSTALL HOOD INSULATOR

13. INSTALL RADIATOR GRILLE

14. INSTALL AUXILIARY CATCH RELEASE LEVER ASSEMBLY

  1. B069271
    Install the auxiliary catch release lever assembly and hood auxiliary catch hook assembly as a unit with the 3 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

← ADJUSTMENTCOMPONENTS →