RX400h · Service Manual BODY

INSTALLATION

Removal / installation


1. INSTALL HOOD SUPPORT ROD

NOTICE:
  1. Do not touch the extendable portion of the rod to prevent foreign objects from attaching to the rod surface.
  2. Do not push sideways on the rod because the rod may bend.

  1. Install the hood support rod to the body with the bolt.

    Torque:
    19.5 N*m{ 199 kgf*cm , 14 ft.*lbf }

  1. Install the hood support rod and clip to the hood sub-assembly.

← REMOVALDISPOSAL →