RX400h · Service Manual BODY

REMOVAL

Removal / installation


1. REMOVE HOOD SUPPORT ROD

NOTICE:
  1. While supporting the hood sub-assembly by hand, remove the hood support rod.
  2. Do not touch the extendable portion of the rod to prevent foreign objects from attaching to the rod surface.
  3. Do not push sideways on the rod because the rod may bend.

  1. B067833E02
    Using a screwdriver, remove the clip and hood support rod from the hood sub-assembly.

  1. Remove the bolt and the hood support rod.

← COMPONENTSINSTALLATION →