RX400h · Service Manual BODY

INSTALLATION

Removal / installation


1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER

2. INSTALL FUEL LID OPENER MOTOR ASSEMBLY

  1. Install the lock.

  1. Install the fuel lid opener motor assembly with the nut.

  1. Connect the connector.


3. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH

  1. B111796
    Engage the 7 clips and install the roof side garnish assembly inner.

  1. B111795
    Install the 3 clips.

  1. Install the 3 bolts and tonneau cover holder cap.

  1. B111797
    Engage the 4 claws and install the seat belt bezel.


4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

  1. B111793
    Engage the 2 clips and install the deck trim side panel assembly.

  1. Install the 4 clips.


5. INSTALL ROPE HOOK

  1. Install the 2 rope hooks with the 2 bolts.

    Torque:
    8.0 N*m{ 80 kgf*cm , 71 in.*lbf }

    HINT:
    Use the same procedure to install the other side.


6. INSTALL REAR FLOOR FINISH SIDE PLATE LH

  1. B111792
    Engage the 2 clips and install the rear floor finish side plate.

  1. Install the clip.


7. INSTALL REAR SEAT SIDE COVER LH

  1. B111791
    Engage the 4 clips and install the rear seat side cover.

  1. Install the 3 clips.


8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

9. INSTALL REAR DOOR SCUFF PLATE LH

  1. B111783
    Connect the connector. (w/ illumination scuff plate)

  1. Engage the 4 claws and 2 clips, and install the rear door scuff plate.


10. INSTALL DECK SIDE TRIM BOX LH

  1. B111781
    Install the deck side trim box with the 2 clips.


11. INSTALL REAR FLOOR FINISH PLATE

  1. B110477
    Engage the 2 claws and 6 clips, and install the rear floor finish plate.

  1. Install the 2 clips.


12. INSTALL DECK SIDE TRIM COVER LH

  1. B111808
    Engage the 5 claws and install the deck side trim cover.


13. INSTALL NO.3 DECK BOARD SUB-ASSEMBLY

  1. B110025
    Install the deck No.3 board sub-assembly with the 2 bolts and 2 nuts.


14. INSTALL NO.2 DECK BOARD SUB-ASSEMBLY

  1. B110024
    Install the deck No.2 board sub-assembly with the 4 bolts and 2 nuts.


15. INSTALL DECK FLOOR BOX REAR

  1. B110023
    Install the deck floor box rear with the 2 clips.


16. INSTALL DECK FLOOR BOX FRONT

  1. B110022
    Install the deck floor box front with the 2 clips.


17. INSTALL DECK BOARD SUB-ASSEMBLY

  1. B110455
    Install the deck board sub-assembly with the 2 bolt.

  1. Engage the 5 clips.


18. INSTALL TONNEAU COVER ASSEMBLY
← INSPECTIONINSPECTION →