REASSEMBLY
Removal / installation
| 1. INSTALL OIL PUMP ROTOR SET |
Apply a light coat of engine oil to the oil pump gear set and place it into the pump body with the marks facing the pump body cover side.
| 2. INSTALL OIL PUMP COVER |
Install the 10 screws and the oil pump cover.
- Torque:
- 10 N*m{ 105 kgf*cm , 8 ft.*lbf }
| 3. INSTALL OIL PUMP RELIEF VALVE |
Apply a light coat of engine oil to the relief valve, and insert the relief valve and spring into the pump body hole.
Install the oil pump relief valve plug.
- Torque:
- 49 N*m{ 500 kgf*cm , 36 ft.*lbf }