RX400h · Service Manual ENGINE

INSTALLATION

Removal / installation


1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)

  1. A111110
    Apply a coat of engine oil to an O-ring of the sensor.

  1. Install the camshaft timing oil control valve with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the camshaft timing oil control valve connector.


2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)

  1. A111109
    Apply a coat of engine oil to an O-ring of the sensor.

  1. Install the camshaft timing oil control valve with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    Connect the camshaft timing oil control valve connector.


3. INSTALL AIR CLEANER CASE W/ RESONATOR

  1. A109267
    Install the air cleaner hose No.1 to the throttle body assembly with the hose clamp.

  1. A106878
    Install the air cleaner case w/ resonator with the 5 bolts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

  1. A109270
    Connect the MAF meter connector.

  1. Connect the 2 wire harness clamps to the air cleaner.

  1. A109893
    Connect the ventilation hose No.2.


4. INSTALL AIR CLEANER CAP W/ INLET

  1. A106877E01
    Install a new air cleaner element to the air cleaner case.

  1. Install the air cleaner cap w/ inlet with the 4 clamps.

  1. Install the air cleaner cap w/ inlet with the 2 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }


5. INSTALL COOL AIR INTAKE DUCT SEAL

  1. Install the 4 clips and cool air intake duct seal.


6. INSTALL ENGINE ROOM COVER SIDE

  1. A109835
    Install the 5 clips and engine room cover side


7. INSTALL ENGINE ROOM SIDE LH COVER

  1. A108719
    Fit the clips and install the engine room side LH cover.

← INSPECTIONCOMPONENTS →