INSPECTION

Resistance inspection.

1. Using an ohmmeter, measure the resistance between the terminals.
   

   Resistance:

   6.9 to 7.9 Ω at 20°C (68°F)
   

   If necessary, replace the camshaft oil control valve assembly.
   

1. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, and check the movement of the valve.
   

   NOTICE:

   Confirm that the valve moves freely and does not stick in any position.

   If necessary, replace the camshaft oil control valve assembly.
   

   HINT:

   Accumulation of foreign objects causes subtle pressure leaks. The subtle pressure leaks will cause the cam to advance, and this will cause a DTC to be set.