RX400h · Service Manual ENGINE

REMOVAL

Removal / installation


1. REMOVE ENGINE ROOM SIDE LH COVER

  1. A108719
    Using a clip remover, remove the engine room side cover.


2. REMOVE ENGINE ROOM COVER SIDE

  1. A109835
    Remove the 5 clips and engine room cover side.


3. REMOVE COOL AIR INTAKE DUCT SEAL

  1. Remove the 4 clips and cool air intake duct seal.


4. REMOVE AIR CLEANER CAP W/ INLET

  1. A106877E01
    Disconnect the 4 clamps.

  1. Remove the 2 bolts and air cleaner cap w/ inlet.

  1. Remove the air cleaner element from the air cleaner case.


5. REMOVE AIR CLEANER CASE W/ RESONATOR

  1. A109893
    Separate the ventilation hose No.2.

  1. A109270
    Disconnect the MAF meter connector.

  1. Disconnect the 2 wire harness clamps from the air cleaner.

  1. A106878
    Remove the 5 bolts from the air cleaner case w/ resonator.

  1. A109570
    Remove the hose clamp, and separate the air cleaner hose No.1.

  1. Remove the air cleaner case w/ resonator.


6. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)

  1. A111110
    Disconnect the oil control valve connector.

  1. Remove the bolt and oil control valve.


7. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)

  1. A111109
    Disconnect the oil control valve connector.

  1. Remove the bolt and oil control valve.

← ON-VEHICLE INSPECTIONINSPECTION →