RX400h · Service Manual ENGINE

REMOVAL

Removal / installation


1. REMOVE OXYGEN SENSOR (for Bank 1)

  1. A108663
    Disconnect the oxygen sensor connector and clamp.

  1. A108664E01
    Using SST, remove the oxygen sensor from the exhaust pipe assembly front No.3.
    SST
    09224-00010  

    NOTICE:
    Do not to damage the oxygen sensor.


2. REMOVE OXYGEN SENSOR (for Bank 2)

  1. A108666
    Disconnect the oxygen sensor No.2 connector.

  1. A108680E01
    Using SST, remove the oxygen sensor No.2 from the exhaust pipe assembly front.
    SST
    09224-00010  

    NOTICE:
    Do not to damage the oxygen sensor.

← COMPONENTSINSPECTION →