RX400h · Service Manual ENGINE

INSPECTION

Inspection


INSPECT OXYGEN SENSOR (for Bank 1)

  1. A082934E01
    Measure the resistance between terminals 1 (HT) and 2 (+B).

    Standard resistance:
    Condition
    		 Specified Condition
    20°C (68°F)
    		 11 to 16 Ω

    If the resistance is not as specified, replace the sensor.


INSPECT OXYGEN SENSOR (for Bank2)

  1. A080122E02
    Measure the resistance between terminals 1 (HT) and 2 (+B).

    Standard resistance:
    Condition
    		 Specified Condition
    20°C (68°F)
    		 11 to 16 Ω

    If the resistance is not as specified, replace the sensor.

← REMOVALINSTALLATION →