REASSEMBLY

Removal / installation

1. INSTALL BUMPER MOULDING SET BOLT NO.1

2. INSTALL REAR BUMPER SIDE SUPPORT LH

1. Install the rear bumper side support LH with the screw.
   

   Torque:

   3.0 N*m{ 31 kgf*cm , 27 in.*lbf }

3. INSTALL REAR BUMPER SIDE SUPPORT RH

4. INSTALL REAR BUMPER SIDE RETAINER LH

1. Install the rear bumper side retainer LH with the 2 screws.
   

   Torque:

   3.0 N*m{ 31 kgf*cm , 27 in.*lbf }

5. INSTALL REAR BUMPER SIDE RETAINER RH

6. INSTALL REAR BUMPER REINFORCEMENT NO.1

1. Install the rear bumper reinforcement No.1 with the 6 nuts.
   

   Torque:

   27 N*m{ 275 kgf*cm , 20 ft.*lbf }

7. INSTALL REAR BUMPER ENERGY ABSORBER

8. INSTALL REAR FOG LIGHT ASSEMBLY LH

9. INSTALL REAR FOG LIGHT ASSEMBLY RH