INSTALLATION
Removal / installation
| 1. INSTALL REAR DOOR BELT MOULDING ASSEMBLY |
| 2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY |
Connect each connector and the cables.
Install the rear door trim board sub-assembly with the 13 clips.
Install the 2 screws.
- Torque:
- screw <A>:
- 3.5 N*m{ 36 kgf*cm , 31 in.*lbf }
| 3. INSTALL REAR DOOR ARMREST COVER |
| 4. INSTALL REAR DOOR ARMREST BASE PANEL ASSEMBLY |
| 5. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG |
| 6. POWER WINDOW CONTROL SYSTEM INITIALIZATION |