RX400h · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation


1. INSTALL COMBINATION METER ASSEMBLY

  1. E109635
    Connect the connectors.

  1. Install the combination meter assembly with the 4 screws.


2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

  1. E109636
    Engage the 4 clips and install the instrument cluster finish panel sub-assembly.


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

4. PERFORM INITIALIZATION

NOTICE:
Some systems need initialization when disconnecting the cable from the negative battery terminal. (Click here)

← REASSEMBLYINSPECTION →