TORQUE SPECIFICATIONS
Specifications
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| Throttle body assembly x Intake air connector |
11 |
112 |
8 |
| Knock sensor x Cylinder block sub-assembly |
20 |
199 |
15 |
| Water outlet x Cylinder head sub-assembly |
15 |
153 |
11 |
| Intake manifold x Cylinder head sub-assembly |
15 |
153 |
11 |
| Ground cable x Intake manifold |
8.4 |
86 |
71 in.*lbf |
| Camshaft timing oil control valve assembly (for Bank 1) x Cylinder head |
8.0 |
82 |
71 in.*lbf |
| Camshaft timing oil control valve assembly (for Bank 2) x Cylinder head |
8.0 |
82 |
71 in.*lbf |
| Crank shaft position sensor x Oil pump |
8.0 |
80 |
71 in.*lbf |
| Air cleaner case w/ resonator x Air cleaner bracket |
5.0 |
51 |
44 in.*lbf |
| Air cleaner cap w/ inlet x Radiator support sub-assembly upper |
7.0 |
71 |
62 in.*lbf |
| Intake air surge tank x Intake manifold |
28 |
286 |
21 |
| Surge tank stay No.2 x Intake air surge tank |
20 |
199 |
14 |
| Surge tank stay No.1 x Intake air surge tank |
20 |
199 |
14 |
| Engine hunger No.1 x Intake air surge tank |
20 |
199 |
14 |
| Emission control valve set x Intake air surge tank |
8.0 |
82 |
71 in.*lbf |