REMOVAL & INSTALLATION

Windshield Washer Motor

MONTERO

1. Disconnect the negative battery cable.
2. Remove the fender splash shield.
3. Drain and remove the washer reservoir.
4. Disconnect the washer motor electrical connector.
5. Disconnect the washer motor hose.
6. Remove the motor from the vehicle.
7. Installation is the reverse of removal.

PICK-UP

1. Disconnect the negative battery cable.
2. Drain and remove the washer reservoir.
3. Disconnect the washer motor electrical connector.
4. Remove the motor from the vehicle.
5. Installation is the reverse of removal.

Rear Washer Motor

MONTERO

1. Disconnect the negative battery cable.
2. Remove the back door trim and waterproof shield.
3. Drain and remove the washer reservoir.
4. Disconnect the washer motor electrical connector.
5. Disconnect the washer motor hose.
6. Remove the motor from the vehicle.
7. Installation is the reverse of removal.