Power Steering Fluid

Filling & Bleeding

1. Safely raise and support the vehicle.
2. Disconnect the return hose connection.
3. Connect a vinyl hose to the return hose, then drain the oil into an appropriate container.
4. Disconnect the connector from the crankshaft position sensor and then while operating the Starter Motor intermittently, turn the Steering Wheel all the way to the left and right several times to drain all of the power steering fluid.
5. Connect the return hoses then secure with the clip.
6. Fill the oil reservoir with Mitsubishi Power Steering Fluid, or an equivalent, up to the lower position of the filter, then bleed the air.