Mitsubishi Motors Service Manual

2018 / ECLIPSE CROSS / EC - Workshop Manual

17 -ENGINE AND EMISSION CONTROL > ADAPTIVE CRUISE CONTROL SYSTEM (ACC) > ACC/FCM-ECU > ACC/FCM-ECU REMOVAL AND INSTALLATION

REMOVAL AND INSTALLATION

caution

When the ACC/FCM-ECU is replaced, after turning the ignition switch "ON" or "LOCK"(OFF), always carry out the calibration of radar at one time (Refer to

Pre-removal and post-installation operation

Front Bumper Assembly Removal and Installation (Refer to GROUP 51 - Front Bumper Assembly ).

			Removal steps
		1.	ACC/FCM-ECU bracket
		2.	ACC/FCM-ECU