2018 / ECLIPSE CROSS / EC - Workshop Manual
23 -AUTOMATIC TRANSMISSION > 23A-CVT > TROUBLESHOOTING<S-AWC><S-AWC> > SYMPTOM CHART
CHECK CHART FOR TROUBLE SYMPTOMS
cautionDuring diagnosis, a diagnosis code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all.
SymptomInspection procedure No.Reference page
Communication Between M.U.T.-IIISE and AWC-ECU Cannot be Established.1
Shifting the S-AWC drive mode-selector does not change the mode2
The tight corner braking phenomenon* appears with the S-AWC drive mode-selector in the AUTO position.
noteThe vehicle is tuned so that the tight corner braking phenomenon appears at a certain level with the drive mode in the SNOW or GRAVEL position.
3
4WD system check screen is displayed on the centre of the multi-information display and a "4WD" symbol flashes at the left top. But no diagnosis codes are set.4
Malfunction of power supply circuit system5
note*Tight corner braking phenomenon: When a 4WD vehicle makes sharp cornering in a paved road at low speed (ex. parallel parking), there is a difference in turning radius between front and rear wheels. If such a difference can no longer be compensated by tyre slippage, the vehicle behaves as if it is under braking.