2018 / ECLIPSE CROSS / EC - Workshop Manual
35 -SERVICE BRAKES > 35C-ACTIVE STABILITY CONTROL SYSTEM (ASC) > TROUBLESHOOTING<ASC-ECU><ASC-ECU> > DIAGNOSIS CODE PROCEDURES > CODE NO. C2200: ABNORMALITY IN ASC-ECU
Code No. C2200 ECU Internal Error
| caution | - If there is any problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table
 ). - Whenever ECU is replaced, ensure that the CAN bus lines are normal.
|
OPERATION
ASC-ECU controls ASC by calculating the data sent from the wheel speed sensor, the steering wheel sensor, and the G and yaw rate sensor.
DIAGNOSIS CODE SET CONDITIONS
This diagnosis code is set when ASC-ECU has malfunction.
PROBABLE CAUSES
ASC-ECU malfunction
DIAGNOSIS PROCEDURE
1. Check whether the diagnosis code is set again.
