2018 / ECLIPSE CROSS / EC - Workshop Manual
37 -ELECTRIC POWER STEERING (EPS) > TROUBLESHOOTING > DIAGNOSIS CODE PROCEDURES > U1195 VARIANT CODING NOT COMPLETED
Code No. U1195 Coding not completed
| caution | - If there is any problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to GROUP 54C, CAN Bus Diagnostics Table
 ). - Whenever ECU is replaced, ensure that the CAN bus lines are normal.
|
OPERATION
Vehicle information is written in EPS-ECU by coding.
FUNCTION
The EPS-ECU judges the vehicle condition by the written coding data.
TROUBLE JUDGEMENT
Judgement Criterion
- The EPS-ECU coding is not completed.
Fail Safe, Back Up Function
- The EPS-ECU sets diagnosis codes No. U1195.
PROBABLE CAUSES
- Malfunction of CAN bus line
- Malfunction of the EPS-ECU
DIAGNOSIS PROCEDURE
1. M.U.T.-IIISE CAN bus diagnostics
2. Replace the EPS-ECU (Refer to ).
