[ Model - ECLIPSE CROSS / Year - 2018 ]
Workshop Manual
Technical Information Manual
Body Repair Manual
Pre-delivery Inspection and Periodic Maintenance
PRINT
PRINT (GROUP)
INSPECTION
2018 / ECLIPSE CROSS / EC - Workshop Manual
42 -BODY > 42A-BODY > DOOR > DOOR HANDLE AND LATCH > INSPECTION
DOOR LOCK ACTUATOR CHECK
For the inspection of the door lock actuator, refer to Door Latch Assembly Inspection (
).
DOOR LOCK SWITCH CONTINUITY CHECK
Remove the power window switch (Refer to GROUP 52A, Door Trim
).
Switch position
Tester connection
Specified condition
LOCK
3 - 4
Continuity exists (2 Ω or less)
UNLOCK
2 - 4
Continuity exists (2 Ω or less)
).).