[ Model - ECLIPSE CROSS / Year - 2018 ]
Workshop Manual
Technical Information Manual
Body Repair Manual
Pre-delivery Inspection and Periodic Maintenance
PRINT
PRINT (GROUP)
2018 / ECLIPSE CROSS / EC - Workshop Manual
51 -EXTERIOR > GARNISHES > TAILGATE GARNISH > TAILGATE GARNISH REMOVAL AND INSTALLATION
LICENCE LAMP GARNISH REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
Rear wiper motor bracket (Refer to
).
Tailgate lock release handle (GROUP 42A, Tailgate handle and latch
).
Tail lamp assembly (Refer to GROUP 54A, Tail Lamp
).
Removal step
1.
Licence lamp garnish
2.
Three-diamond mark
3.
Slide nut
4.
Cushion
