[ Model - ECLIPSE CROSS / Year - 2018 ]
2018 / ECLIPSE CROSS / EC - Workshop Manual
54 -CHASSIS ELECTRICAL > 54A-CHASSIS ELECTRICAL > HEADLAMP > HEADLAMP > HEADLAMP REMOVAL AND INSTALLATION
REMOVAL AND INSTALLATION
 
 
Pre-removal Operation
  • Front Bumper Assembly Removal (Refer to GROUP 51- Front Bumper Assembly ).
Post-installation Operation
  • Front Bumper Assembly Installation (Refer to GROUP 51 - Front Bumper Assembly ).
  • Headlamp Aiming Adjustment (Refer to ).
 
Removal Steps
>>A<<1.Headlamp assembly
2.Grommet
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< HEADLAMP ASSEMBLY INSTALLATION
 
Tighten the mounting screw and bolts to the specified torque in the order shown.
Tightening torque:
  • Screw(1): 1.5 ± 0.3 N·m
  • Bolt(2, 3): 4.5 ± 1.5 N·m