[ Model - ECLIPSE CROSS / Year - 2018 ]
PRINT
PRINT (GROUP)
| caution | On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnosis code(s) associated with other system may be set. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all. |
| Diagnosis code No. | Diagnostic item | Reference page |
| B16A7 | Tail lamp(RH) circuit short <Short circuit in the position lamp (RH) circuit or the tail lamp (RH) circuit> |  |
| B16A8 | Tail lamp(LH) circuit short <Short circuit in the position lamp (LH) circuit, tail lamp (LH) circuit or the licence plate lamp circuit> | |
| B1E17 | Tail lamp(RH) deactivated (FET failure) | |
| B1E18 | Tail lamp(LH) deactivated (FET failure) | |
| B1E1C | Stoplamp Overload or Short Circuit | |