[ Model - ECLIPSE CROSS / Year - 2018 ]
2018 / ECLIPSE CROSS / EC - Workshop Manual
54 -CHASSIS ELECTRICAL > 54A-CHASSIS ELECTRICAL > TURN-SIGNAL LAMP > TURN-SIGNAL LAMP > TURN-SIGNAL LAMP REMOVAL AND INSTALLATION
REMOVAL AND INSTALLATION
 
 
cautionWhen removing the front turn-signal and fog lamp assembly from the front bumper assembly, pull out it straight so that the pin of front turn-signal and fog lamp assembly does not break.
Pre-removal Operation
  • Front Bumper Assembly Removal (Refer to GROUP 51- Front Bumper Assembly ).
Post-installation Operation
  • Front Bumper Assembly Installation (Refer to GROUP 51 - Front Bumper Assembly ).
  • Front Fog Lamp Aiming Adjustment (Refer to ). <Vehicles with fog lamp>
 
Removal steps
1.Front turn-signal and fog lamp assembly
2.Front turn-signal lamp socket
3.Front turn-signal lamp bulb
4.Front fog lamp bulb <Vehicles with fog lamp>
5.Front turn-signal and fog lamp unit