[ Model - ECLIPSE CROSS / Year - 2018 ]
2018 / ECLIPSE CROSS / EC - Workshop Manual
54 -CHASSIS ELECTRICAL > 54A-CHASSIS ELECTRICAL > ETACS > DIAGNOSIS CODE PROCEDURES > CODE NO.B1761 CHASSIS NO. NOT PROGRAMMED
Code No.B1761 Chassis No. not programmed
 
 
caution
  • Before replacing the ECU, ensure that the power supply circuit, the earth circuit and the communication circuit are normal.
 
 
JUDGEMENT CRITERIA
If the chassis number is not written to the ETACS-ECU, the ETACS-ECU sets diagnosis code No. B1761.
 
 
PROBABLE CAUSES
  • Chassis No. not programmed
  • Malfunction of the ETACS-ECU
 
 
DIAGNOSIS PROCEDURE
1. If no chassis number is stored in the ETACS-ECU, check whether a chassis number is stored in the engine-ECU (Refer to GROUP 13A - Diagnosis code No.P0630 "Chassis Number not Programmed" ).
2. Check whether the diagnosis code is set again.