[ Model - ECLIPSE CROSS / Year - 2018 ]
2018 / ECLIPSE CROSS / EC - Workshop Manual
54 -CHASSIS ELECTRICAL > 54A-CHASSIS ELECTRICAL > MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS) > MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS) > MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS) REMOVAL AND INSTALLATION
REMOVAL AND INSTALLATION
noteWhen the multivision display is replaced, always turn the ignition switch to the "ON" position once and then carry out the operation check.
Pre-removal and Post-installation Operation
Instrument Panel Air Outlet Panel Assembly Removal and Installation (Refer to GROUP 52A - Instrument Centre Panel ).
 
Removal steps
1.Multivision display assembly
2.GPS antenna
3.CAN box unit assembly
4.CAN box unit bracket
5.CAN box unit
6.Centre hood assembly
7.Multivision display bracket
8.Multivision display