[ Model - ECLIPSE CROSS / Year - 2018 ]
Workshop Manual
Technical Information Manual
Body Repair Manual
Pre-delivery Inspection and Periodic Maintenance
PRINT
PRINT (GROUP)
2018 / ECLIPSE CROSS / EC - Workshop Manual
54 -CHASSIS ELECTRICAL > 54A-CHASSIS ELECTRICAL > SECURITY ALARM > SECURITY ALARM SIREN REMOVAL AND INSTALLATION
REMOVAL AND INSTALLATION <Vehicles with security alarm sensor>
Pre-removal operation
Removal of brake booster assembly (Refer to GROUP 35A - Master Cylinder Assembly and Brake Booster Assembly
)
Post-installation operation
Installation of brake booster assembly (Refer to GROUP 35A - Master Cylinder Assembly and Brake Booster Assembly
)
Removal Steps
>>A<<
1.
Security alarm siren assembly
2.
Security alarm siren bracket
3.
Security alarm siren
4.
Sub harness
INSTALLATION SERVICE POINT
>>A<< SECURITY ALARM SIREN BRACKET INSTALLATION
Use the earth bolts as the mounting bolts for security alarm siren bracket. The earth bolts have "E" mark on the bolt heads.
