REMOVAL & INSTALLATION

1. Grasp the valve and pull it from the base of the air cleaner.
2. Holding the valve in one hand and the hose in the other, carefully pull the valve from the hose and remove it from the vehicle.

   NOTE: Some PCV valve hoses will be retained to the valve using a clamp. If so, use a pair of pliers to slide the clamp back on the hose until it is clear of the bulged area on the end of the PCV valve nipple. With the clamp in this position, the hose should be free to slip from the valve.

3. Check the PCV valve for deposits or clogging.

   To install:

4. Install the PCV valve back in the base of the air cleaner and connect the PCV hose and clamp (if equipped).