Removal of the interior trim panels is very simple if the time is taken to
do it carefully. To remove any of the panels all that is needed is a screwdriver
and a trim removal tool.
- Select the panel that you are going to remove and locate all of the retaining
screws. Many of the screws are hidden behind plastic covers, so keep this
in mind when looking.
- Remove the mounting screws and carefully pry the panel away from the body.
- Release any retaining clips as needed. Be careful not to scratch or gouge
the panels.
To install:
- Install the panels making sure that they are aligned properly on all sides
before tightening the screws.
- Tighten the screws use an alternating pattern to tighten the panel evenly
and prevent warpage.
