Brake Caliper

Removal & Installation

To Remove:

1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
2. Safely raise and support the vehicle.
3. Remove or disconnect the following
   • Wheel

   • Union bolt
   • Brake hose from caliper body assembly

   • Lock pin to caliper body bolt
   • Caliper body and move it toward vehicle center to separate it from support

To Install:

1. Install or connect the following:
   • Caliper body on support
     1. Torque to: 19.5 ft. lbs. (26.5 Nm)
     • Brake hose
       1. Torque to: 13 ft. lbs. (18 Nm)

     CAUTION
     Replace brake hose gaskets with new ones.

   • Bleed air from brake system.
   • Lower the vehicle.