Cylinder Head

Removal & Installation

To Remove:

1. Disconnect or remove the following for right side

   Negative Battery Cable

   • Ground cable from battery

     Engine Harness Connector

     Engine Harness Bracket

   • Engine harness connector with bracket from air cleaner upper cover
   • Air intake duct
   • Air cleaner case
   • Ignition coil connector
   • Ignition coil
   • PCV hose from rocker cover

     Valve Cover

   • Rocker cover mounting bolts
   • Rocker cover
   • Front exhaust pipe
   • Timing belt
   • Head
2. Disconnect or remove the following for left side

   Negative Battery Cable

   • Battery cable
   • Battery and battery carrier

     Washer Motor Connector

   • Washer motor connectors

     Washer Bottle Bolts

   • Washer tank mounting bolts
   • Washer tank (set aside)
   • Ignition coil connector
   • Ignition coil
   • PCV hose from rocker cover

     Valve Cover

   • Rocker cover bolts
   • Rocker cover
   • Front exhaust pipe
   • Timing belt
   • Head

To Install:

1. Connect or install the following for right side
   • Head
   • Timing belt
   • Front exhaust pipe
   • Rocker cover

     Valve Cover

   • Rocker cover mounting bolts
   • Ignition coil connector
   • Ignition coil
   • PCV hose from rocker cover

     Engine Harness Connector

     Engine Harness Bracket

   • Engine harness connector with bracket from air cleaner upper cover
   • Air intake duct
   • Air cleaner case

     Negative Battery Cable

   • Ground cable from battery
2. Connect or install the following for left side
   • Head
   • Timing belt
   • Front exhaust pipe
   • Rocker cover

     Valve Cover

   • Rocker cover bolts
   • Ignition coil connector
   • Ignition coil
   • PCV hose from rocker cover

     Washer Motor Connector

   • Washer motor connectors

     Washer Bottle Bolts

   • Washer tank mounting bolts
   • Washer tank (set aside)

     Negative Battery Cable

   • Battery cable
   • Battery and battery carrier