To Remove:
- Disconnect or remove the following
- Ground cable from battery
- Air intake duct and cleaner case or the air intake chamber
- Intercooler (turbo model)
- Back-up light switch and neutral position switch connector
- Back-up light switch and neutral position switch with harness
To Install:
- Install or connect the following
- Back-up light switch and neutral position switch with harness
- Torque Specification: 24.5 Nm (18.1 Ft. Lbs.)
- Back-up light switch and neutral position switch connectors
- Air intake duct and cleaner case or the air intake chamber
- Intercooler (turbo model)
- Battery ground cable to battery
