Engine noise – Connecting rod noise
Precautions: General safety (00)
Perform troubleshooting referring to the following points when ECM has detected no DTC and no abnormality has been found in Visual Inspection:K14C and Engine Basic Inspection:K14C.
| Condition | Possible Cause | Action |
|---|---|---|
|
Engine noise – Connecting rod noise
NOTE:
Before checking mechanical noise, check that:
•Specified spark plug is used.
•Specified fuel is used. |
Worn piston, piston ring and cylinder bore
|
|
|
Worn connecting rod bearing
|
||
|
Worn crankshaft pin
|
||
|
Loose connecting rod bolts
|
||
|
Low oil pressure
|
Condition “Low oil pressure”
|