DTC P0700 / P0701
Precautions: General safety (00)
DTC Detecting Condition and Trouble Area
| DTC detecting condition | Trouble area |
|---|---|
|
P0700: Transmission Control System (MIL Request) ECM received MIL request from TCM via CAN. (1 D/C detection logic but MIL does not light up) |
Twin clutch system |
|
P0701: Transmission Control System Range / Performance Any of the following conditions is met.
•ECM received inconsistent CAN signal from TCM. (1 D/C detection logic)•ECM received “Engine stop request signal” from TCM via CAN. |
TCM |
DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 |
Was “Engine and Emission Control System Check” performed?
|
Go to Step 2.
|
|
| 2 |
DTC check
1)Check TCM for DTC.
Is there any DTC(s) detected in TCM?
|
Go to applicable DTC troubleshooting.
|
Clear DTC
 , and recheck DTC. |