Battery Inspection
Precautions: Precautions for Handling Battery · Precautions for Replacing Battery · General safety (00)
Common Causes of Failure
There are the following causes for the fall of the battery function.
•Accessories left on overnight or for an extended period without generator operation.
•Frequent driving at slow speed for short periods.
•Electrical load exceeds generator output, particularly due to additional fitting of aftermarket equipment.
•Defects in charging system.
•Failure to keep terminals clean or making hold-down clamps too loose or too tight.
•Mechanical problems in electrical system such as short-circuit or pinched wires.
•Deterioration of battery due to long-term use.
•Deterioration of battery due to long-term storage.
•Frequent driving at slow speed for short periods.
•Electrical load exceeds generator output, particularly due to additional fitting of aftermarket equipment.
•Defects in charging system.
•Failure to keep terminals clean or making hold-down clamps too loose or too tight.
•Mechanical problems in electrical system such as short-circuit or pinched wires.
•Deterioration of battery due to long-term use.
•Deterioration of battery due to long-term storage.
Visual Inspection
Check for visible damage, such as a cracked or broken case or cover, which may lead to loss of electrolyte. If visible damage is noted, replace battery. Determine cause of damage and make corrections if necessary.