Brake Fluid Level Inspection
Precautions: Precautions for Brake Service · Precautions for Brakes · General safety (00)
•Use brake fluid indicated on brake master cylinder reservoir cap or in Owner’s Manual.
•Check that brake fluid level is between MAX and MIN marks on reservoir of brake master cylinder.
•Check that brake fluid level is between MAX and MIN marks on reservoir of brake master cylinder.
NOTE:
If brake warning light comes on during driving or brake fluid level on brake master cylinder reservoir is “MIN” mark or lower, check the following points:
•Thickness of front brake pads and rear brake pads
•Fluid leakage from piston seal of front brake caliper and rear brake caliper
•Crack or damage to brake hoses and brake pipes
•Damage to clutch hose and clutch pipe (M/T model)
•Fluid leakage from brake master cylinder and reservoir
•Fluid leakage from piston seal of front brake caliper and rear brake caliper
•Crack or damage to brake hoses and brake pipes
•Damage to clutch hose and clutch pipe (M/T model)
•Fluid leakage from brake master cylinder and reservoir
In case any abnormality is found, repair or replace affected parts.
After the check and repair are completed, replenish brake fluid so that fluid level falls between “MAX” and “MIN” marks on brake master cylinder reservoir.