DTC P19A1-81 / P19A2-81 / P19A2-86 / P19AC-81 / P19AD-86 / P19AE-86 / P19AF-86 / P19B0-86 / P19B1-86 / P19B2-81 / P19B3-81 / P19BC-81 / P19E2-86 / P19E8-86 / P19EB-86 / P19EC-81
Precautions: Precautions for Diagnosing Trouble · Precautions for Disassembly and Reassembly · Precautions for Transmission / Transaxle · General safety (00)
DTC Detecting Condition and Trouble Area
| DTC detecting condition | Trouble area |
|---|---|
|
P19A1-81: CAN Invalid Data of Accelerator Position – Invalid Serial Data Received Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
•CAN communication line
•ECM •TCM |
|
P19A2-81: CAN Invalid Signal of IPC Control Outside Air Temperature – Invalid Serial Data Received Invalid signal via CAN is received from IPC. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19A2-86: CAN Invalid Signal of IPC Control Outside Air Temperature – Signal Invalid Invalid signal via CAN is received from IPC. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19AC-81: CAN Invalid Signal of Acceleration Sensor Value – Invalid Serial Data Received Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19AD-86: CAN Invalid Data of Engine Torque Actual – Signal Invalid Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19AE-86: CAN Invalid Data of Engine Torque Minimum Capacity – Signal Invalid Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19AF-86: CAN Invalid Data of Engine Torque Maximum Predicted Capacity – Signal Invalid Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19B0-86: CAN Invalid Data of Driver Power Request – Signal Invalid Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19B1-86: CAN Invalid Data of Engine Coolant Temperature – Signal Invalid Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19B2-81: CAN Invalid Data of Engine Idle Reference Speed – Invalid Serial Data Received Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19B3-81: CAN Invalid Data of Barometric Pressure – Invalid Serial Data Received Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19BC-81: CAN Invalid Signal of Master Cylinder Pressure – Invalid Serial Data Received Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19E2-86: CAN Invalid Data of Engine Torque Target Without TM request – Signal Invalid Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19E8-86: CAN Invalid Signal of Engine Intake Air Temperature – Signal Invalid Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19EB-86: CAN Invalid Data of Engine Speed – Signal Invalid Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
|
|
P19EC-81: CAN Invalid Signal of Exhaust Temperature – Invalid Serial Data Received Invalid signal via CAN is received from ECM. (1 D/C detection logic but transmission warning light does not light up) |
•CAN communication line
•ECM •TCM |
DTC Confirmation Procedure
WARNING:
If you do not select a suitable route and take proper precautions when performing a road test, an accident can occur.
•Select a level road with no traffic to minimize the risk of accident.
•Perform the test extremely carefully.
•Perform the road test with 2 persons, a driver and a tester.
•Perform the test extremely carefully.
•Perform the road test with 2 persons, a driver and a tester.
NOTE:
Check that the following condition is satisfied in this procedure.
•11 V < Battery voltage < 15 V
1)Start engine and drive vehicle.
DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 |
Was “Twin Clutch System Check” performed?
|
Go to Step 2.
|
Go to Twin Clutch System Check.
|
| 2 |
DTC check
Is there any CAN-DTC detected?
|
Go to troubleshooting for CAN-DTC.
|
Go to Step 3.
|
| 3 |
DTC check
1)Check ECM for DTC.
Is there any DTC(s) detected?
|
Go to troubleshooting for applicable DTC.
|
Replace TCM and recheck DTC.
|